• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Handy Men Tools

Home Tools Review

  • Appliance
  • Welding
  • Tools
  • Show Search
Hide Search

Best Plasma Cutter For The Money

Jason · February 28, 2019 · Leave a Comment

Accurate and clean cuts are very essential when it comes to cutting, while there are bunch of plasma cutters on the market, it’s a bit difficult to get one that worth the bucks. This is why we’ve reviewed the best plasma cutter for the money in this article. They’re bound to give you an accurate and clean edges at affordable cost.

Cutters reviewed in this article are suitable for small hobbyist as well as large scale industries. Every single penny spent on them is a solid investment. Check through the review and select the product that suit your taste the most.

Best Plasma Cutters For The Money

 

#1. Hypertherm 088079 Powermax30 XP

 

Model: 04-ZVGR-008D

Length:17

Width:8

Height:12.5

Weight: 22 lbs.

Duty Cycle:

Input: 110/220V

Output: 50 AMP Air Plasma Cutting

Ideal Cut thickness: 1 / 2”

Max Severance Thickness: 3 / 4 “

The Hypertherm Powermax30 XP Hand Plasma Cutter is extremely compact and lightweight and of great performance and come study with almost everything you need to start cutting effect .  The divide is foolproof and works consistently it correct to wear any weather with expect and you can expect to have 0% hiccups with the Hypertherm Powermax30 XP Hand Plasma Cutter.

They will change automatically adapt to 110 volts to 240-volt input power includes with plug adaptors hard carry case orchards gloves shoulder straps candle consumables and farm court consumables.  The dragon touches his designer to be able to withstand impact and heat and provide ay show constable grip.

The draw tip of the machine is also very nice cutting without dragging on the work surface which allows for deeper and faster court the machine is very strong and durable fit for very extensive use page this will cut through pretty thick headed corroded metal fairly easily. It can cut through any metal; stainless steel, steel, aluminum, mild steel etc.

 

#2.  Lotos LTPDC2000D Plasma Cutter

Model: CT520D

Length:17

Width:8

Height:12.5

Weight:32 lbs.

Duty Cycle: 10-200 A @ 220 V & 10-150 A @ 110 V / 10-200 A @ 220 V & 10-150 A @ 110 V

Input: 110/220V (Stick/MMA)

Output: 50 AMP Air Plasma Cutting

Ideal Cut thickness: 1 / 2”

Max Severance Thickness: 3 / 4 “

 The Lotos LTPDC2000D Plasma Cutter Hot pretty impressive,  it can cut through 3 / 4 inch Steel underwear is also very neat. 

The thick welding work perfect they can be used by a more professional to get some pretty job done it is very easy to use the pilot hawk court rusty and painted metal what are the best feature is the drive voltage and the automatic voltage detection compact and has a handle for portability and uses more hazardous compressed air to cut telltale and Steel copper and aluminium.

You can also  do quality tig welding Ontario or steel and precise welding of tara guard materials you can remove a foot pedal with a device but this is not included it is lightweight and easy to move around the console that comes with the machine are specific to the machine the machine comes with  cutting torch, Tig torch, Stick/MMA welder, Argon Regulator and connections.

 

#3. PRIMEWELD Premium & Rugged 50A

Model:

Length: 15 in.

Width: 6 in.

Height: 12 in.

Weight:22.5 lbs.

Duty Cycle: 10-50 A Duty Cycle @ 40°C (104°F) 60% @ 50A, 110V 60% @ 50A

Input: 110/220V

Output: 50 AMP Plasma Cutting

deal Cut thickness: 1 / 2”

Max Severance Thickness: 3 / 4 “

 

The PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter works great and producing clear cuts.  evil cut through 3 / 16”, 1 / 14”   metal plate. local for the price it worked like a charm it is very easy to set up and very straightforward the nation head cut up to 1 / 4” with maximum severance of 3 / 4” with ease.

Each other very to be suitable for both industrial and construction work home or hobby use with your blood plasma cutter you can cut stainless steel, alloy steel, mild steel,   and other metals without no need to worry. it’s not a portable plasma cutter but you can carry model from one project to another and ends at the best price this is what you need.

 

#4. SUNCOO Cut-50 Plasma Cutter 

Model:  8330000100

Weight:22.5 lbs.

Length: 15. in.

Width: 6.1 in.

Height: 9.8in.

Duty Cycle:  60%,Efficiency 85%

Input: 110/220V

Output: 50 AMP Plasma Cutting

Ideal Cut thickness: 1 / 2”

Max Severance Thickness: 3 / 4 “

 

The SUNCOO Cut-50 Plasma Cutter Electric DC Inverter Cutting plasma cutter is an excellent unit with a nearly opposite transformer inside and the circuit board. 

It is suitable for businesses diy uses and also professional operators. the plastic water powers up to 1 /2-inch steel soccer operations and smooth cutting surfaces it is very suitable for cutting carbon steel, stainless steel.  Copper, iron,  and aluminum materials etc. at 220 volts fantastical and faster.

Dispersive plasma cutter cut with some consumables and the machine works well durable to buy plastic tubing for the air connection from the regulator to the machine the air connector hook it up with a quick connection on the side of the regulator that goes to the air compressor it is granted you will not experience any leak but if you do cycle have a very good customer service relationship.

You would need to buy a plug that fits your power outlet and the machine as the year does not come with a plug this is a good machine for the money it cuts 1 / 8”  mild steel with ease like butter and it is a lightweight making it very convenient it’s a lot faster than the acetylene torch for cutting steel and it is less expensive because no gas is needed just electricity and air .

#5. Ramsond CUT 50DX 50 Amp

Model: CUT 50DX

Length: 14.2 in.

Width: 6 in.

Height: 9 in.

Weight: 19 lbs.

Duty Cycle: 60%

Input: 110/220V

Output: 50 AMP Plasma Cutting

deal Cut thickness: 1 / 2”

Max Severance Thickness: 3 / 4 “

 

The machine cut grade and the amp and the air pressures was very well the air pressure and the amperage of the machine are good and very easy to cut it is recommended to replace the ground clamp when you purchase this plasma cutter for convenience the plasma cutter is very efficient and it goes through still like hotness in butter it automatically detect 110V/ 220V .

It also has an integrated digital display of current and pressure.


Benefits of plasma cutting

Ease of use: The plasma cutters would have noticed from the product above are portable and compact and can easily be moved forever the job demand.  all the brands reviewed in this article as a portable that just one person can easily handle it.

Cuts fast: Plasma cutting is much faster when compared to any cutting tool a death the job done in a fraction of the time that any other fourteen to will and the plasma cutting does not need to be preheated before cutting and this saves time.

Quality and Precision: These are the major advantages of using a plasma cutter especially when cutting different shapes and angles sheet metal.  some brand comes with consumables for fine thin cuttings  and the ease at which the plasma cutter works piercing deep into the material producers good quality results.

Versatility: Plasma cutting unlike other fuel techniques can cut different material facts on top of one another with the fastest cutting speed.  he can cut diverse types of metals and use an electric socket any conductive metals steel iron aluminum stainless steel brass copper and other metal materials.

Piercing Speed: Trades men understand that less time equals more money. The plasma cutter does not need to be heated up before cutting; it therefore takes considerable less time to piece and cut a 15mm metal. Cutting this thickness of metal will take the Oxyfuel process about 30 seconds because it will need to heat up to 1000C first, while this will only take the plasma cutter about 2 seconds.

Safety: The plasma cutting process uses gas that is not highly flammable. Some brands use air. It is safer than other cutting process.

Conclusion


Plasma cutting is very beneficial, high speed, low cost and precise cutting process highly recommended for anyone, DIY users, fabricators, sculptures, construction workers, engineers, artists etc.

You will find each of these best plasma cutter for the money very convenient as they are easy to learn and professionals, hobbyists and beginners can knock out pretty impressive jobs with any of them.  

You can choose from a different price range of plasma cutters; high-performance pricy plasma cutters and very compact and completive performance cheap plasma cutters and get real value.

Important Articles

Best Lightweight Cordless Hedge Trimmers

5 Best Dual Voltage MIG Welders

Best Tool Belt Suspenders

Best Welding Helmet for the Money

Best Small Welder for the Money

Best Auto Welding Mask

Filed Under: Welding

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Categories

  • Appliance
  • Tools
  • Welding

Our Latest Articles

  • Wood Router Reviews: The Best Wood Router for the Money
  • Top 10 Best Auto Darkening Helmets in 2021
  • Top 9 Best Budget Welding Helmets
  • The 8 Best TIG Welders for the Money
  • The Best Electric Hedge Trimmer in 2021

Footer

Affiliate Disclosure

HandyMenTools.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites
to earn advertising fees by advertising and linking to Amazon.com.

Copyright © 2021 · Daily Dish Pro on Genesis Framework · WordPress · Log in